PA10100

From: $399.00

TECHNICAL SPECIFICATIONS PA10100
Diameter: Frequency Response: Power Handling: Voice Coil Diameter: Winding Width: Impedance: Connector: Spider: X-max: Magnet: Mounting Depth: Cut-out Diameter:	10” High Performance Midbass/Woofer 35Hz to 2500Hz 600 Watts RMS 3.0” BAA former with copper windings 1.25” Available in 4-ohm and 8-ohm Spring-loaded 8-gauge 6” flat progressive roll with woven leads 22mm peak-to-peak – 100% in the gap Single 90-ounce Y-35 Ferrite 4.75” 9.125”

RECOMMENDED ENCLOSURE

As a Midbass:

.5 Cubic feet sealed with 1” of poly-fill on each inside wall except the baffle. 65Hz resonant frequency.
.5 Cubic feet ported with a 2” round port x 6” long. 47Hz tuning frequency.

As a Mid-woofer:

25 Cubic feet ported with a 4” round port x 13” long. 40.6Hz upper tune.
50 Cubic feet ported with a 4” round port x 13” long. 37 Hz lower tune.

If these parameters are not sufficient, please do not hesitate to give us a call (561-799-3688) and we will be glad to help you build a custom tuned enclosure. We use LEAP exclusively for that “perfect” result!